catalogs

TecDoc Engine Number: AUDI CDAA ;
Transmission Type: Manual Transmission, 6-speed ;
Engine Version: for engines with dual-mass flywheel ;
Number of splines on input shaft: 23 ;
ArticleState: Normal ;
Technical Information: self adjust clutch ;
Technical Information: 2 in 1

Quantity: 1 ;
Material: Iron ;
ArticleState: Normal

Number of Teeth: 23 ;
Diameter [mm]: 240 mm ;
Supplementary Article/Info 2: with clutch slave cylinder ;
Multi-piece: Three-piece ;
for flywheel manufacturer: Sachs ;
Plate diameter [mm]: 240 mm ;
ArticleState: Normal ;
Technical Information: Without Release Bearing

for flywheel manufacturer: Sachs ;
Diameter [mm]: 240 mm ;
Supplementary Article/Info 2: with clutch plate ;
Supplementary Article/Supplementary Info: with clutch pressure plate ;
Supplementary Article/Info 2: without releaser ;
Adjustment: with automatic adjustment ;
Supplementary Article/Info 2: with screw set ;
Supplementary Article/Info 2: Requires special tools for mounting ;
Engine Version: for engines with dual-mass flywheel ;
ArticleState: in Preparation

Outer diameter [mm]: 240 mm ;
for flywheel depth [mm]: 10 mm ;
Number of Teeth: 23 ;
Supplementary Article/Info 2: without releaser ;
Weight [kg]: 11,598 kg ;
Observe service information: ;
ArticleState: Normal ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf nur durch geschultes Fachpersonal erfolgen. Produkte werden in der Regel ohne Montageanleitung geliefert.

for flywheel manufacturer: Sachs ;
Diameter [mm]: 240 mm ;
Supplementary Article/Supplementary Info: with clutch pressure plate ;
Supplementary Article/Info 2: with clutch plate ;
Supplementary Article/Info 2: without releaser ;
Adjustment: with automatic adjustment ;
Supplementary Article/Info 2: Requires special tools for mounting ;
Engine Version: for engines with dual-mass flywheel ;
Supplementary Article/Info 2: Check and replace dual-mass flywheel if necessary. ;
ArticleState: Normal

Engine Code: CDAA ;
Transmission Type: KSC ;
Transmission Type: Manual Transmission ;
Diameter [mm]: 240 mm ;
Hub Profile: 21.9x24.5 ;
Number of Teeth: 23 ;
ArticleState: Normal ;
Technical Information: 3 pcs. kit (Plate + Disc + Concentric Slave Cylinder )

Manufacturer Restriction: Sachs ;
Engine Version: for engines with dual-mass flywheel ;
Number of Teeth: 23 ;
Diameter [mm]: 240 mm ;
Supplementary Article/Info 2: without clutch slave cylinder ;
Multi-piece: Two-piece ;
Plate diameter [mm]: 240 mm ;
ArticleState: Normal

Diameter [mm]: 240 mm ;
Number of Teeth: 23 ;
Mounting Type: not pre-mounted ;
ArticleState: No longer supplied by manufacturer ;
Technical Information: Beinhaltet ZMS, Kupplungsdruckplatte, Kupplungsscheibe und CSC ;
Technical Information: Nur als Satz lieferbar ;
Technical Information: enthält Druckplatten- und Schwungradbefestigungsschrauben

Diameter [mm]: 240 mm ;
Number of Teeth: 23 ;
Mounting Type: not pre-mounted ;
ArticleState: Normal ;
Technical Information: enthält Druckplatten- und Schwungradbefestigungsschrauben ;
Technical Information: Beinhaltet ZMS, Kupplungsdruckplatte, Kupplungsscheibe und CSC

Transmission Type: Manual Transmission, 6-speed ;
Diameter [mm]: 240 mm ;
Hub Profile: 21,8 x 24,2 - 23 ;
Max. transferable engine torque [Nm]: 600 Nm ;
Number of Teeth: 23 ;
Clutch: for vehicles with single disc clutch ;
Mounting Type: not pre-mounted ;
ArticleState: Normal ;
Technical Information: NUR FÜR MOTORSPORT! ;
Technical Information: enthält Druckplattenbefestigungsschrauben ;
Technical Information: Beinhaltet starres Schwungrad, Kupplungsdruckplatte und Kupplungsscheibe ;
Technical Information: Torsionsgefederte Sinterscheibe ;
Technical Information: ohne Ausrücker

Engine Code: CDAA ;
Transmission Type: KSC ;
Transmission Type: Manual Transmission ;
New Part: ;
Supplementary Article/Supplementary Info: with clutch pressure plate ;
Diameter 1 [mm]: 240 mm ;
Outer diameter [mm]: 241 mm ;
Version: DBR ;
Eject Force [N]: 7300 N ;
Supplementary Article/Info 2: with clutch plate ;
Diameter 2 [mm]: 240 mm ;
Outer diameter 1 [mm]: 240 mm ;
Number of Teeth: 23 ;
Hub Profile: 24,2 x 21,8 ;
Supplementary Article/Supplementary Info: without central slave cylinder ;
for flywheel manufacturer: SACHS ;
Weight [kg]: 5,71 kg ;
ArticleState: No longer supplied by manufacturer ;
Technical Information: ohne Ausrücker ;
Technical Information: Kein spezialwerkzeug zur Montage notwendig ;
Technical Information: 2-Komponenten-Kit (Druckplatte & Scheibe)